The beauty of
decorative concrete – it’s mantenance is minimal. It does require cleaning,
washing and resealing to extend its life
and eye appeal for years into the future.
Just like waxing a car, reseal our concrete
imprint with our MF Sealer Clear and the color will be as vibrant as the day it was installed.
Routine maintenance is fairly
straightforward. No. 1 priority is to make sure the surface is clean
and dry before it is resealed. Master
Finishes concrete imprint can be cleaned with water and a mild cleaner. Most situations require only the cleaning
of the surface and application of the new MF Sealer Clear.
Recommended maintenance period
The frequency of maintenance will depend
on how high a traffic area to cars, foot traffic, water, and any chemicals the concrete is exposed to.
Conditions Maintenance Period
24 months – 36 months
12 months – 24 months
6 months – 12 months
Repairing damaged concrete
In the event, a repair is required to a
damaged concrete imprint, cut approximately 50mm accordance to the shape of mould to the area that
require a repair work. Refill with concrete mix and follow the concrete imprint installation method.
Intensifying the color
Our special formulated sealer can also be
used for darkening the concrete. The effect is called color saturation and it will remains as long as the seal
coat is maintained. If the decorative project seems to have ‘lost’ its color, a new coat of
pigmented sealer will likely restore the beautiful rich color. This pigmented sealer is
translucent and will act to glaze over the original color. The sealer will create uniformity of color and
minimize highlights or variations in the color. Always work with sample first to approve the effect.